ISO/TS 16949 Adare - official supplier of AIAG core tool manuals APQP, FMEA, MSA, PPAP, SPC

ISO/TS 16949 is an ISO Technical Specification, which aligns existing American (QS-9000), German (VDA6.1), French (EAQF) and Italian (AVSQ) automotive quality systems standards within the global automotive industry, with the aim of eliminating the need for multiple certifications to satisfy customer requirements.

Together with ISO 9001, ISO/TS 16949 specifies the quality system requirements for the design/ development, production, installation and servicing of automotive related products. In addition, there are customer specific requirements that are required by individual subscribing vehicle manufacturers.

There are 5 core tools required to effectively implement and audit ISO/TS 16949. They are FMEA, MSA, SPC, PPAP and APQP. The following manuals for these core tools, and a range of supporting manuals, are available to order securely via this site.

ISO/TS16949 Core Tools Manuals
Item code	Edition	Title	Price	Quantity
APQP	SECOND	Advanced Product Quality Planning & Control Plan This manual provides general guidelines for ensuring Advanced Product Quality Planning is implemented in accordance with the requirements of the customer. It does not give specific instructions on how to arrive at each APQP or Control Plan entry. These guidelines are intended to cover most situations that can normally occur in the early planning or design phases, or during process analysis.	£45.00	€54.00
FMEA	FOURTH	Potential Failure Mode and Effects Analysis FMEA 4th Edition is a reference manual to be used by suppliers to Chrysler LLC, Ford Motor Company, and General Motors Corporation as a guide to assist them in the development of both Design and Process FMEAs. The manual does not define requirements. It is intended to clarify questions concerning the technical development of FMEAs.	£45.00	€54.00
MSA	FOURTH	Measurement Systems Analysis - Latest edition This manual provides guidelines for selecting procedures to assess the quality of a measurement system. This manual is an introduction to measurement system analysis. It is not intended to be a compendium of analyses for all measurement systems. Its focus is measurement systems where readings can be repeated, this edition includes procedures for non-replicable measurement systems. There is also an emphasis on measurement as a lifelong process and the need to study measurement systems over time.	£40.00	€48.00
PPAP	FOURTH	Production Part Approval Process PPAP defines requirements for production part approval, including production and bulk materials. Its purpose is to determine if all customer engineering design record and specification requirements are properly understood by the supplier, and that the process can produce products consistently meeting requirements during an actual production run at the quoted production rate.	£45.00	€54.00
PPAP(D)	FOURTH	Production Part Approval Process (Deutsch version) PPAP defines requirements for production part approval, including production and bulk materials. Its purpose is to determine if all customer engineering design record and specification requirements are properly understood by the supplier, and that the process can produce products consistently meeting requirements during an actual production run at the quoted production rate.	£45.00	€54.00
SPC	SECOND	Statistical Process Control This manual is an introduction to statistical process control, and is intended to cover normally occurring SPC system situations. It is not intended to limit evolution of SPC methods suited to particular processes or commodities.	£40.00	€48.00
CT-K		Supplier Quality Requirements pack of 5 core tools manuals (APQP; PPAP; FMEA; MSA; SPC) Includes the latest editions of five recommended production supplier manuals: APQP, PPAP, FMEA, MSA and SPC.	£195.00	€234.00
FORMS_CD	FIFTH	Core Tools Forms CD This CD includes the required forms doe the latest edition of APQP, PPAP, FMEA, MSA and SPC. It comprises a user-friendly program with international formatting for A4 paper size. No special training or maintenance fees are required. The CD clearly details how to meet Quality Audit requirements and enables sharing of common data between documents.	£95.00	€114.00

Item code	Edition	Title	Price	Quantity
PD ISO/TS 16949:2009	2009	Quality management systems. Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations Published Document (PD) 16949, in conjunction with BS EN ISO 9001:2008, defines the quality management system requirements for the design and development, production and, when relevant, installation and service of automotive-related products. PD 16949 is applicable to sites of the organization where customer-specified parts, for production and/or service, are manufactured.	£168.00	€202.00

Welcome:
			LOGIN
	0 items	£0.00